Natural Pillar Soy Wax (USA)

This wax used natural soywax and a blend of premium vegetable oils to formulate a unique blend with proprietary US research to make pillar and standing candles. 

• Provides excellent scent throw
• Minimal surface frosting
• Makes smooth and creamy soy pillar and standing candles
• Preferred choice for professional candle makers
• Saves time from blending different waxes to produce the same results

Pro Tip

• For smoother surface, use a heat gun to smooth out the tops of finished candles. This method gets rid of tiny holes, wavy and uneven surfaces.
  

*ETHICALLY PRODUCED. SUSTAINABLE. RENEWABLE. NEVER TESTED ON ANIMALS.


Specification

• Origin: USA
• Appearance : Off white pellets
  
• Odour : Neutral
• Melting Point : 56 °C
• Flash Point : 260 °C
• Recommended Scent Load 10% - 12%
• Recommended Pour Temperature 38 °C - 41 °C
• Solubility : Insoluble in water
• Biodegradation : Bio-degradable

MSDS-NATURAL PILLAR SOY WAX

INSTRUCTIONS FOR HOW TO MAKE CANDLES :

• Get your wicks ready by putting the wick into the hole of the mold or stick it in the middle of the mold/container.
  
• Clip the wick upright with plastic clip at the top of the mold/container if needed.
• Heat wax direct over low fire or in a double boiler.
• Be careful not to overheat wax.
• Stir occasionally (overheated wax will discolour and/or burn your wax).
• Remove wax from fire and allow wax to cool down for 5 minutes.
• Add colour & fragrance or essential oil. (Oils will evaporate if the wax is too hot)
• Stir and mix gently.
• Gently pour the wax into mold.
• Allow wax to set at room temperature and let it cure for 1-2 days.
• Demold / remove from mold.

Caution

• Use only candle approved dyes to ensure no toxins will be burnt during use
• Use safe candle fragrance oils to ensure scent is safe for breathing in
• Do not add plant powders, uncertified coloring powders that may be toxic or inhibit burning of flame
• Never shut a candle with water, blow out the fire or cover flame to starve off oxygen
• Using a good quality wick will ensure even flame, low soot and no harmful toxic residues
• Make sure any botanical decorations are away from the wick so it will not catch fire

For more candle making ingredients, tools and DIY workshops, please visit our Award Winning Experience outlet - Craftiviti.

__________

Menggunakan campuran 100% tulen lilin soya semulajadi dan minyak sayuran yang diformulasi untuk pembuatan lilin batang (pillar).

• Memberi tahap aroma yang baik dan mengurangkan formasi Kristal kecil lalu membantu untuk menghasilan tekstur halus dan putih pada Lilin Soya ‘Pillar’.
• Untuk menghasilkan pemukaan yang licin dan rata, anda mungkin memerlukan pistol haba.

Spesifikasi

• Asal: Amerika Syarikat
  
• Bentuk: Pelet
• Aroma: Neutral
• Takat lebur / beku: 56 ° C
• Takat kilat: 260 ° C
• Penggunaan Minyak Wangian yang Disyorkan 10% - 12%
• Suhu Tuang yang Disyorkan 38 ° C - 41 ° C
• Tidak larut dalam air
• Bio-degradasi

Cara-cara untuk menghasilkan lilin:

• Panaskan lilin dalam pengukus (double boiler). Sila berhati-hati supaya lilin tidak dibiarkan terlalu panas. Kacaukan ia sekali-sekala (lilin terlalu panas akan menyebabkan warna bertukar luntur atau lilin akan hangus).
• Keluarkan lilin daripada api dan biarkan lilin menyejuk selama 5 minit.
• Tambahkan warna & wangian (Fragrance Oil) atau minyak pati (Essential Oil). (Minyak akan menyejat jika lilin terlalu panas)
• Dengan perlahan-lahan tuangkan lilin ke dalam bekas acuan yang telah dipasangkan dengan sumbu.
• Biarkan lilin menyejuk dan mengeras sebelum keluarkan dari bekas acuan.