Enhance Wood Surfaces with Tung Oil: The Eco-Friendly Solution for Lasting Protection

Enhance Wood Surfaces with Tung Oil: The Eco-Friendly Solution for Lasting Protection

Tung oil, derived from the seeds of the tung tree, boasts a rich history dating back to ancient China and used to protect wood on Chinese junk boats for centuries up to this day.

Boats of Old China – 17 Impressive Vintage Pictures of Chinese Junks in ...

Recognized for its exceptional protective qualities and aesthetic enhancement capabilities, tung oil has emerged as a popular choice for wood finishing.

This eco-friendly and non-toxic substance forms a robust, water-resistant barrier, safeguarding wood surfaces against moisture, mildew, and environmental degradation.

Moreover, its ease of application and ability to accentuate the natural beauty of wood make it a preferred option for craftsmen and DIY enthusiasts alike.

Craftiviti Tung Oil

Here is how to use Tung Oil on wood:

  1. Prep your wood: Before applying tung oil, make sure the wood surface is clean, dry, and free of any existing finishes or coatings.
  2. Apply with care: Use a brush, rag, or sponge to apply a thin, even coat of tung oil to the wood surface. Allow it to penetrate for about 15-30 minutes.
  3. Wipe away excess: After the oil has had time to soak in, wipe off any excess with a clean, dry cloth. This helps prevent drips and ensures a smooth finish.
  4. Repeat as needed: Depending on the level of protection and sheen you desire, you may need to apply multiple coats of tung oil, allowing each coat to dry fully before applying the next.
  5. Let it cure: Finally, allow the tung oil to cure for at least 24 hours (or longer, if possible) before using or exposing the wood to moisture.

 Tung Oil Step By Step - Craftiviti

Discover more about Tung Oil here >>>

To find out other ways to use Tung Oil, join our Craftizen Community click here!

PSS: Craftizens, get additional 5% off on top of our new discount structure and so much more.


Back to blog

Leave a comment

Please note, comments need to be approved before they are published.