So sorry but we will not be able to send items which contains any element thereof that are dangerous, hazardous, combustible, radioactive, explosive, corrosive, biohazard, inhalation hazard, perishable and poisonous gases to East Malaysia (Sabah and Sarawak) and internationally.
Kindly check with us if you are unsure of item's hazardous status enquiry@craftiviti.com
Silicone Mold Release Agent Spray is an economical lubricant that is colorless, odorless and ozone friendly.
Release agent should be used for an easy removal of cured silicone rubber from the master/original of sculpture, figurine or pattern.
- When casting a two-part silicone mold, it is very important to spray completely the cured half of the mold with release agent to prevent it from bonding/sticking to each other.
- Generously spray on the first part of the mold. Allow release agent to dry completely and spray again.
- Repeat these steps 3 to 4 times before pouring your second part mold.
IMPORTANT NOTE: We find this works well on small mold making. This item is less suitable for larger 2 part silicon molds.
Mold Release Agent Spray are used to:
- Coat a mold to be used for casting epoxy resin without any bonding
- Protect the master or original such as sculpture, figurine, 3D pattern and more so that it can be easily demold once finished
- Eliminate squeaks on hinges
- Preserve plastic, rubber and leather
Precautions:
- Avoid eye contact and skin contact
- Do not puncture or incinerate the can
- Do not store at temperatures above 120°F (48.8°C)
More craft materials available online and at our craft shop @ Craftiviti Sdn. Bhd. (Petaling Jaya, Malaysia).
-------------------------------------------------------------------------------------------
Penghantaran Barang Berbahaya
Maaf, kami tidak dapat menghantar barang-barang yang mengandungi unsur-unsur yang berbahaya, mudah terbakar, radioaktif, mudah meletup, menghakis, bio bahaya, bahaya penyedutan, gas mudah rosak dan beracun ke Malaysia Timur (Sabah dan Sarawak) dan antarabangsa.
Spray Agen Pelepasan Acuan Silikon adalah pelincir yang mampu milik yang tidak berwarna, tidak berbau dan mesra ozon.
- Semasa membuang acuan silikon dua bahagian, sangat penting untuk menyemburkan sepenuhnya separuh acuan yang telah dibentuk dengan agen pelepas untuk mengelakkannya melekat /bercantum antara satu sama lain.
- Semburkan dengan lembut pada bahagian pertama acuan. Biarkan agen pelepas kering sepenuhnya dan semburkan lagi.
- Ulangi langkah ini 3 hingga 4 kali sebelum menuangkan acuan bahagian kedua anda.
Spray Agen Pelepasan Acuan digunakan untuk:
- Menyalut acuan yang akan digunakan untuk membentuk resin epoksi tanpa bercantum
- Melindungi master atau yang asli seperti arca, patung, corak 3D dan lain-lain sehingga dapat dikeluarkan dengan mudah setelah siap
- Menghilangkan bunyi geseran pada engsel
- Memelihara plastik, getah dan kulit